Here’s How We Install Your Backsplash
A lot goes into a backsplash before the first tile goes on the wall. We’re figuring out where the cuts will land, what everything should line up with, and how to make it look like it belongs in your kitchen.
Here’s how we work through it.
Serving Anne Arundel County, Annapolis, and Howard County. Projects elsewhere in the DMV considered based on location and scope.
01
First, We Get Everything Planned
Once your deposit is paid, we start getting the installation materials and pickup arrangements together.
Most homeowners supply their tile. If you want us to get it for you, just let us know. We’ll work out the details and any costs with you beforehand.
02
We Set Up and Protect Your Space
When we arrive, we set up our cutting station outside. The setup depends on the tile we’re working with.
Then we protect the areas we’ll be using with moving blankets, drop cloths, and countertop coverings. We’re going to be working right up against your counters and cabinets, so we take the time to cover things properly.
We also get the outlet areas ready before we start installing.
03
Then We Figure Out the Layout
This is one of the parts we spend the most time on.
We check whether your countertops are level. Sometimes they aren’t, and we have to work out our cuts so the first row of tile stays level and looks right against the countertop.
We also look at the focal points—where your eye naturally goes—and plan the layout around them. We want it to feel balanced, with cuts that make sense at the corners and edges.
If you have that short granite backsplash along the countertop, we’ll talk about whether you want to keep it. A lot of times, we prefer removing it and bringing the tile right down to the counter, but we’ll figure out what works for your kitchen together.
Explore Backsplash Replacement →
04
We Want the Whole Backsplash to Feel Finished
If you have little countertop sections along the side walls, we like to bring the tile around those too, where the layout allows.
We think about where the tile should end in relation to the cabinets and wall corners. Those smaller sections make a difference—they help it feel like one complete backsplash.
And wherever the tile has an exposed edge, we plan a finished detail for it.
Plan Where Your Backsplash Starts and Stops →
05
Once the First Row Is Right, We Start Building From There
After that first row is cut and installed, the rest starts to flow.
We work through one wall at a time. When we move around a corner, we measure from the tile that’s already installed so we’re accounting for its thickness.
As we reach outlets, cabinets, and other details, we take the time to make those cuts fit neatly. Those are the places you’ll keep seeing every day.
06
We Pick the Grout Color With You
During installation, we bring out the grout swatches and look through them together.
You can see the colors next to your actual tile and decide whether you want the grout to blend in or make the pattern stand out. Then we arrange the grout for the finishing visit.
07
Then We Come Back for Grout and Finishing
Before we grout, we clean out the joints and make sure everything is ready. That takes time too, but it’s part of getting a clean finish.
We include LATICRETE SPECTRALOCK 1 premium grout. At corners and transitions—such as where tile meets the countertop or cabinets—we use 100% color-matched silicone.
We pay attention to that silicone line. We want a nice, consistent bead that looks professional.
Then we refit the outlets and cover plates. Sometimes a small adjustment is needed so a cover plate sits flat against the tile. It’s a little detail, but you notice when there’s a gap.
What Do We Include?
We include the adhesive chosen for your tile, standard installation materials, premium grout, color-matched silicone, and standard decorative edging.
The edging might be Schluter or a comparable profile, with a finish that works with your tile, grout, or the metals in your kitchen.
Some homeowners don’t realize they need edging until installation is underway. That’s why we plan for it and include a standard option from the beginning.
If you want matching bullnose tile, pencil trim, or another specialty detail, we’ll talk that through. Those pieces are typically homeowner supplied, along with the tile itself.
Natural stone and marble can need extra preparation and sealing. We’ll work out what your particular material needs and include that in the project scope.
How Long Does It Take?
We typically install the tile on the first visit and return for grouting and finishing.
Installation commonly takes around 8–12 hours, depending on the size and details. On the finishing visit, cleaning the joints can take another hour or two, and grouting around two hours, followed by silicone and final fitting.
We’ll talk through the timing for your kitchen. The material and conditions can change the schedule, and we want to give each part the time it needs.
Understand the Installation Timeline →
A thank-you for your service.
We offer $150 off backsplash installation for active-duty military, veterans, National Guard, Reserve, and military spouses.
Mention our military appreciation offer when you send us your project photos.
Want Us to Take a Look?
You don’t need to have everything figured out. Send us a few photos of your kitchen and tell us what you’re thinking.
We’ll help you understand what the project involves and what the next step looks like.